PCIe
FC1121
 
FC1121 PCIe EtherCAT slave card

FC1121 | PCIe EtherCAT slave card

The FC1121 PCIe (PCI Express) EtherCAT card can be used to integrate a PC as a slave in an EtherCAT network. The card has an EtherCAT channel with two ports (IN/OUT). The FC1121 can therefore also be used for the development of EtherCAT slave software on the PC.

The FC1121 can optionally be retrofitted with the FC600x NOVRAM cards in order to backup data on the NOVRAM. Three NOVRAM sizes are available: 128, 256 and 512 KB.

Technical data FC1121
Fieldbus EtherCAT (direct mode)
EtherCAT plug 2 x RJ 45, EtherCAT IN/OUT
Data transfer rates 100 Mbit/s
Interface to the PC PCIe (PCI Express) interface
EtherCAT Slave Controller FPGA
RAM 8 kbyte
SYNC manager 8
FMMUs 8
Cable length up to 100 m
Hardware diagnosis 2 LEDs per channel (activity, link)
Dimensions approx. 100 mm x 130 mm
Operating temperature 0…+55 °C
Driver TwinCAT driver for EtherCAT
Ordering information
FC1121 standard configuration
Accessories  
TX1100 I/O driver
Cordsets cordsets and connectors
System  
EtherCAT For further EtherCAT products please see the system overview.