Special Functions
CPV1x-VI-IP-8
 
CPV10-VI-IP-8, CPV14-VI-IP8 Festo valve terminal with IP-Link interface for Fieldbus Box system

CPV10-VI-IP-8, CPV14-VI-IP8 | Festo valve terminal with IP-Link interface for Fieldbus Box system

The Festo CPV1x-VI-IP-8 valve terminals have an IP-Link interface and can therefore be integrated into the Fieldbus Box system. The combination of fieldbus and I/O variety with pneumatics offers a large number of application options. Like an Extension Box, the valve terminal is connected to the Coupler Box via the IP-Link bus; the distance may be up to 15 m. The Coupler Box is the head station with integrated fieldbus connection, to which up to 120 extension modules can be connected. No special configuration is required in the system integration, because the Coupler Box automatically recognises the modules. The CPV valve terminals differ in terms of their physical size.

Technical data CPV10-VI-IP-8 CPV14-VI-IP-8
Number of channels max. 16 valves on max. 8 valve discs
Size 10 mm 14 mm
Diagnostics message in case of under-voltage < 20.4 V DC, LED and status byte
Rated load voltage 24 V DC (-15 %/+20 %)
IP-Link connection 2 x IP-Link socket for ZS1020-0010 connector
Distance between stations max. 15 m
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image 2 byte output (compact)/3 byte input and output (complex)
Electrical isolation between control voltage US and load voltage UP: yes
Protection class IP 65

The CPV1x-VI-IP-8 valve terminals can be ordered only from Festo AG & Co..